Batteries Used

The devices use AA batteries - 1.5V.
We recommend Panasonic Powerline Alkaline AA batteries, 1.5V.


  • Devices "LPMDL_1103" and "LPMDL_1105" require 2 batteries of the type mentioned above.
  • Device "LPMDL_1101" requires 3 batteries of the type mentioned above.


Battery Replacement Procedure

Required Tools:

  • Standard Philips (PH) screwdriver
  1. Unscrew the four screws located at the corners of the device.



        2 .Remove the cover to access the batteries. Replace the batteries one at a time.



NOTE:
It is recommended to replace the batteries between data transmissions. If the replacement occurs during a data transmission, the configuration will be lost, and reconfiguration will be necessary.
If all batteries are removed at once, the configuration might also be lost.



After successfully replacing the batteries, place the cover back and tighten the screws to maintain water and moisture protection according to the IP68 standard. 





Checking the Next Data Transmission

To check the next scheduled data transmission:

  1. Log in to the platform: https://iot.thingslog.com/
  2. Click on the main menu button.










  1. In the menu, click the "Devices" button and select "Transmissions."






In this window, you can see when the last transmission occurred ("Last Transmissions") and when the next transmission is scheduled ("Next Transmissions").






This is the time window in which you can replace the batteries according to the instructions provided.